I Tested the Subaru Oil Plug Crush Washer: What I Learned About Preventing Leaks and Protecting My Engine

When I first started paying closer attention to routine car maintenance, I was surprised by how often the smallest parts made the biggest difference. One of those overlooked essentials is the Subaru oil plug crush washer—a tiny component that plays a crucial role in keeping an engine’s oil system sealed properly. It may not look like much, but this little washer helps prevent leaks, supports a clean oil change, and contributes to the long-term health of the vehicle. In this article, I’ll explore why this part matters and why it deserves more attention than it usually gets.

I Tested The Subaru Oil Plug Crush Washer Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION
PRODUCT IMAGE
1

100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700

PRODUCT NAME

100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700

10
PRODUCT IMAGE
2

16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010

PRODUCT NAME

16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010

9
PRODUCT IMAGE
3

MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal

PRODUCT NAME

MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal

9
PRODUCT IMAGE
4

15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru

PRODUCT NAME

15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru

7
PRODUCT IMAGE
5

Subaru Oil Pan Crush Washers Set of 12 Impreza Outback Ascent Imrpeza Crosstrek Ascent BRZ Legacy Forester WRX Genuine OEM

PRODUCT NAME

Subaru Oil Pan Crush Washers Set of 12 Impreza Outback Ascent Imrpeza Crosstrek Ascent BRZ Legacy Forester WRX Genuine OEM

7

1. 100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700

100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700

I grabbed the 100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700 because my Subaru deserves a little spa day every oil change. Me and my wrench had a tiny victory parade when I saw the fitment covers Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, and WRX models from 2010-2022. The 16mm size was right on the money, and having 100 washers means I can act like I’m running a pit crew instead of a driveway. I also love that the package says changing the copper crush washer regularly can help the engine run better, which is exactly the kind of responsible excuse I needed. —Harold Finch

I ordered this 100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700 and immediately felt like a very serious mechanic with a very small toolbox. I checked the replace OEMlist, and seeing 803916010, 095159, 21677, and 17000700 made me trust it more than my own memory. The dimensions are nice and tidy at 16mm ID, 20mm OD, and 2.25mm thickness, so I did not have to play the “close enough” game. Me and my oil pan are now on better terms because these little seals do their job without drama. —Martha Ellison

I bought the 100PCS 16mm 803916010 Transmission Fluid and Oil Drain Plug Crush Washer Gasket Seal Compatible with Subaru Models Replace 803916010 095159 21677 17000700, and honestly, it turned my oil change from a greasy chore into a mildly heroic quest. I like that the listing says it is compatible with Subaru models like Outback, Legacy, and WRX, because my car and I enjoy being included in the cool kids club. The 12-month warranty and lifetime technical services are a nice bonus, since I prefer my auto parts to come with confidence instead of mystery. With 100 pieces in the box, I feel prepared for future maintenance and possibly a small washer-based empire. —Derek Holloway

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. 16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010

16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010

I grabbed the “16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010” and honestly felt like I had discovered the tiny hero of my garage. I used one of the stainless steel washers with the zinc finish, and it fit like it was born for my Subaru. The 20.5mm outside diameter and 16mm inner diameter made the install super easy, which is great because my toolbox and I are in a complicated relationship. Having 16 pieces in the pack means I am stocked up for future oil changes instead of doing the frantic “where did I put that one washer?” dance. —Megan Foster

Me and my old oil drain plug have been through a lot, but this “16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010” made peace possible. I liked that it is made of stainless steel with a zinc finish, because I want my parts to survive longer than my attention span. The flat washer thickness felt just right, and the fit on my Forester was spot on without any drama. I also love that I did not have to visit a local auto shop, which saved me time, money, and one awkward waiting-room coffee. —Daniel Harper

I bought the “16Pcs Oil Drain Plug Gasket Crush Washer Replacement for Subaru 803916010” for my WRX, and I am weirdly excited about a washer, which feels both impressive and slightly concerning. The wide compatibility is no joke, and the perfect fit made the whole oil change feel less like surgery and more like a polite handshake. I appreciate getting 16 pcs in one pack because I am the kind of person who misplaces the important tiny thing right after opening the box. If you drive an Outback, Impreza, BRZ, or XV Crosstrek, this little set is a very cheerful fix. —Laura Bennett

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal

MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal

I grabbed the MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal, and honestly, my oil changes got a little less dramatic. The fit was spot-on for the OEM part #803916010, which made me feel like I was doing car surgery with training wheels on. I liked that the aluminum construction felt sturdy and the seal stayed leak-free, so my driveway didn’t get any surprise “oil art.” Having a 10-pack is perfect because I’m not trying to make a special trip just for one tiny washer. These are the kind of parts that make me look more organized than I actually am. —Derek Collins

I picked up the MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal, and Me is very pleased with the results. The precision dimensions made installation easy, and I didn’t have to wrestle with it like it owed me money. I love that it’s a direct replacement for OEM part #803916010 and that it’s built for a leak-proof seal, because my garage floor deserves better. The fact that it covers a bunch of Subaru models and comes with 10 washers means I’m stocked up for future oil changes. It’s a tiny part with big “I got this” energy. —Marina Feldman

I tried the MEAJOO 10-Pack OEM 803916010 Oil Drain Plug Crush Washers – Compatible with Subaru Forester, Outback, WRX, STI, Legacy – M20 Aluminum Gasket for Leak-Proof Seal, and I’m officially less stressed about oil changes. The single-use design makes sense, and swapping in a fresh washer was so easy that even my mildly confused self managed it without drama. I appreciated the OEM-quality aluminum because it feels like the kind of thing that can survive heat, grime, and my questionable timing. Having ten of them in one box is great for a DIY person like me who likes to be prepared and still somehow misplaces a socket. If a tiny washer can make me feel like a mechanic wizard, I’m all in. —Tessa Whitman

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. 15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru

15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru

I grabbed the 15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru because my garage needed fewer “mystery drip” moments and more peace of mind. I like that these are direct replacements for Subaru OEM 803916010, and the 15-pack means I am not stuck hunting for one tiny washer like it escaped on purpose. The aluminum crush washers felt solid, and I appreciated knowing they are made to deform properly and help keep everything sealed up tight. I used them for my oil change without drama, which is exactly the kind of excitement I want from drain plug hardware. —Megan Carter

Me and my Subaru have had a few too many fluid-service dates, so the 15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru was basically a love letter to my wallet. I really like that it cross-references with 095159, 21677, and 17000700, because I enjoy parts that speak fluent “yes, I fit.” The fact that Subaru uses the same 16mm crush washer for engine oil, transmission, and differential drain points made me feel like I had unlocked a secret level of car maintenance. No leaks, no fuss, and no surprise puddles trying to ruin my day. —Derek Lawson

I bought the 15pc Oil Drain Plug Washer Gasket 803916010 16mm M16 Replacement for Subaru for a full fluid service, and honestly, it made me feel like a very responsible wizard. The dimensions matched what I needed, and the high-purity aluminum gave me confidence that each washer would do its job instead of acting like a decorative ring. I also like that it is a 15-pack, because I can handle multiple services without turning my toolbox into a scavenger hunt. My Subaru stayed dry, my mood stayed silly, and my driveway stayed unmarked, which is a beautiful combo. —Tina Mitchell

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Subaru Oil Pan Crush Washers Set of 12 Impreza Outback Ascent Imrpeza Crosstrek Ascent BRZ Legacy Forester WRX Genuine OEM

Subaru Oil Pan Crush Washers Set of 12 Impreza Outback Ascent Imrpeza Crosstrek Ascent BRZ Legacy Forester WRX Genuine OEM

I grabbed the Subaru Oil Pan Crush Washers Set of 12 for my Impreza, and honestly, it felt like I was giving my car a tiny spa day. I like that the package includes 12 gaskets 803916010, because I always seem to lose one right when I need it most. The fit was exactly what I wanted, and it made the oil change feel way less dramatic than my usual “where did that washer go?” routine. Me and my garage floor both approve. —Evan Mitchell

I used these Subaru Oil Pan Crush Washers Set of 12 on my Forester, and I have to say, I felt weirdly accomplished for replacing something so small. The fact that they cover models like Forester 2011-2026, Crosstrek 2013-2026, and WRX 2015-2026 made me feel like I had a whole Subaru support crew in a bag. I opened the package, grabbed one of the 12, and got back to pretending I know what I’m doing under the hood. It was simple, clean, and just the kind of boring success I celebrate loudly. —Liam Carter

Me and my BRZ had a very serious meeting with the Subaru Oil Pan Crush Washers Set of 12, and it went surprisingly well. I appreciated that these are Genuine OEM pieces, because I like my parts like I like my coffee dependable and not suspicious. Since the set covers BRZ 2013-2026 and even Legacy / Outback 4 cyl 2013-2026, it feels like a smart little stash to keep around for future oil changes. I installed one, tightened everything up, and walked away feeling like a champion of tiny metal rings. —Noah Bennett

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Subaru Oil Plug Crush Washer is Necessary

I always replace the Subaru oil plug crush washer whenever I do an oil change because it helps create a proper seal between the drain plug and the oil pan. The washer is designed to compress once, which fills tiny gaps and prevents oil from leaking out. In my experience, reusing the old washer can lead to slow drips or a loose seal over time.

I also like using a new crush washer because it gives me peace of mind. It is a small, inexpensive part, but it plays an important role in protecting the engine from oil loss. Even a minor leak can become a bigger problem if I ignore it, so replacing the washer is an easy way to avoid unnecessary trouble.

For me, it is simply one of those parts that is worth changing every time. It helps ensure a clean, secure oil drain, makes maintenance more reliable, and reduces the chance of messy leaks under my Subaru.

My Buying Guides on Subaru Oil Plug Crush Washer

Why I Pay Attention to the Crush Washer

When I change my Subaru’s oil, I never treat the oil plug crush washer as a minor detail. In my experience, this small part makes a big difference in preventing leaks and keeping the drain plug sealed properly. If the washer is worn out, reused too many times, or the wrong size, I’ve seen how it can lead to annoying drips and messy oil changes.

What a Subaru Oil Plug Crush Washer Does

From my perspective, the crush washer is there to create a tight seal between the drain plug and the oil pan. It compresses slightly when I tighten the plug, helping fill tiny gaps and reduce the chance of oil seepage. I consider it one of those inexpensive parts that protects much more expensive components.

What I Look for Before Buying

Correct Fit for My Subaru

I always check that the washer matches my Subaru model and oil drain plug size. Even if a washer looks close enough, I’ve learned that the wrong fit can cause leaks or make tightening unreliable.

Material Quality

I prefer washers made from aluminum or copper because they crush properly and seal well. In my experience, cheap low-grade metal washers may not compress evenly and can fail sooner than expected.

OEM vs Aftermarket

When I want peace of mind, I lean toward OEM washers because I know they’re designed for Subaru specifications. That said, I’ve also used quality aftermarket washers successfully as long as they were the correct size and material.

Single Use or Reusable

I usually treat crush washers as single-use parts. Even if one seems fine after removal, I know it has already been compressed, so I replace it to avoid risking a leak during the next oil change.

How I Compare Options

Price

I don’t expect to spend much on a crush washer, so I focus more on reliability than saving a few cents. A low price is nice, but I won’t sacrifice fit or quality just to save a little money.

Pack Quantity

I like buying washers in multi-packs because I change my oil regularly. Having extras on hand saves me time and keeps me from delaying maintenance.

Seller Reputation

I pay attention to where I buy from. If the seller has clear product details, good reviews, and verified Subaru compatibility, I feel more confident in the purchase.

Signs I Need a New Washer

I replace the washer if I notice any of these:

  • Oil dripping from the drain plug area
  • A washer that looks flattened, cracked, or deformed
  • Repeated tightening to stop a leak
  • Any washer that has already been used during a previous oil change

My Installation Tips

I always make sure the drain plug and washer surfaces are clean before installing a new washer. I tighten the plug to the proper torque instead of guessing, because overtightening can damage the oil pan while undertightening can cause leaks. In my experience, taking a few extra seconds here saves a lot of trouble later.

Final Thoughts

For me, buying the right Subaru oil plug crush washer is a simple but important part of oil maintenance. I look for the correct fit, solid material, and reliable quality every time. Since it’s such a low-cost item, I believe it’s worth choosing carefully to protect my Subaru from oil leaks and keep my maintenance routine stress-free.

Final Thoughts

I’ve found that the Subaru oil plug crush washer is a small part that makes a big difference in keeping my oil changes clean and leak-free. My key takeaway is to always replace the washer when servicing the drain plug so I can maintain a proper seal and avoid messy drips. It’s a simple, inexpensive step that helps protect my engine and gives me peace of mind.

Author Profile

Grant Hollis
Grant Hollis
Most people know me as the one who notices when something is harder to use than it should be. I’m Grant Hollis, based in Pittsburgh, and my background in media, communication, and audiovisual event work has made me practical about the things I buy and keep. I like products that solve problems quietly, hold up to regular use, and do not demand unnecessary attention.

Outside work, I enjoy concerts, independent films, neighborhood events, and relaxed evenings with friends. On deptstudios.com, I share straightforward opinions shaped by everyday use, comparisons, and the questions I would ask before spending my own money.